(Solved): DO THIS: Change The Isenteopic Edficiency Of The Pump To 58% And Isenteopic Efficiency Of Fhe Steam ...
DO THIS: change the isenteopic edficiency of the pump to 58%
and isenteopic efficiency of fhe steam tuebine to 39%. with these
values interpolate and solve the example problem. be detailed about
the interpolation that is being done since the wholw problem will
depend on it. to see fuerher steps you can use the thermodynamics
book Yunus edition 9.
PLEASE FOLLOW RHE STEPS AND CHANGE THE EFFICIENCIES AS
GIVEN!!!!!
EXAMPLE 10-2 An Actual Steam Power Cycle A steam power plant operates on the cycle shown in Fig. 10-5. If the isentropic efficiency of the turbine is 87 percent and the isentropic efficiency of the pump is 85 percent, determine (a) the thermal efficiency of the cycle and (b) the net power output of the plant for a mass flow rate of 15 kg/s.
Pin 15.9 MPa 35°C 15.2 MPa 625°C Boiler - 16 MPa 15 MPa 600°C W pump, in Wurt. Pump 17p = 0.85 Turbine Mr = 0.87 9 kPa 38°C 10 kPa 6s 6 Condenser Gout FIGURE 10-5 Schematic and T-s diagram for Example 10-2.
bb bb -- +.188 - ttb Nome
